GEAR PUMP manufacturer In CHINA
Gear pump is suitable for conveying lubricating oil or other liquids similar to lubricating oil without solid particles and fibers, non-corrosive, temperature not higher than 80℃, viscosity of 5×10-6 ~ 1.5×10-3m2/s (5-1500CST).
Gear pump uses
KCB series gear pump is suitable for conveying no solid particles and fibers, non-corrosive, temperature is not higher than 80℃, viscosity of 5×10-6 ~ 1.5×10-3m2/s (5-1500CST) lubricating oil or similar properties of lubricating oil liquid.
The pump has a reasonable design of oil drainage and oil return groove, is the gear in the work under the torque force is small, so the bearing load is small, small wear, high pump efficiency. KCB gear pump belongs to a general oil pump, widely applicable, convenient maintenance, deeply loved by the majority of customers, KCB gear pump these years has been a wide range of applications of an industrial pump.
KCB gear pump is a pump body, before and after the pump cover, gear, active and passive shaft, bearings, valves and shaft end seals and other parts.
KCB gear pump simple and compact structure, easy to use and maintenance, smooth operation, stable use.
KCB gear pump is suitable for conveying medium viscosity is not more than 150mm2/S, KCB gear oil pump temperature is not higher than 12080℃, non-corrosive, no hard particle impurities and fiber of heavy oil, diesel oil, mechanical oil, vegetable oil and other liquids similar in nature.
KCB gear pump is mainly used in petroleum, chemical, metallurgy, mining, KCB gear pump power station and other industries of oil medium transfer, pressurization, fuel oil and large mechanical equipment in the thin oil cycle, KCB gear pump in all kinds of mechanical equipment can be used as lubrication pump.
KCB series gear pump is mainly divided into stainless steel material and ordinary material, gear pump flow range is divided into: 0.6 cubic to 5 cubic, 6 cubic to 60 cubic, 70 cubic to 580 cubic three levels, the use of pressure from 0.3 to 2.5 range, can be different flow stage customer needs. In addition, our company with many years of production gear pump experience can be customized according to customer requirements of different materials, different pressure, different suction gear pump, gear pump, ordinary material, stainless steel material can be, welcome customers to visit the site order!
KCB gear pump is a rotary pump that relies on the working volume change and movement formed between the pump cylinder and the meshing gear to transport liquid or pressurize it. It consists of two closed Spaces: two gears, pump body and front and back cover. When the gear rotates, the volume of the space of the gear off side increases from small to large, forming a vacuum, and the liquid is sucked in. The volume of the space of the gear meshing side decreases from large to small, and the liquid is squeezed into the pipeline. The suction cavity and the discharge cavity are separated by the meshing lines of two gears. Gear pump outlet pressure depends on the size of the pump source resistance. This type of pump has self-priming, every time before the pump does not need to fill liquid, simple and compact structure, easy to use and maintenance. The pump by the delivery of liquid automatic lubrication daily work, without additional lubricating oil and with the elastic coupling to transfer power can compensate for the installation caused by the small deviation, in the hydraulic impact play a buffer role. KCB gear pump is a pump body, pump cover, gear, bearing sleeve and shaft end seal components. Gear pump gear, shaft are treated by nitriding, have higher hardness and abrasion, gear and shaft are installed in the shaft sleeve. Gear pump pump operating parts are using its transmission medium lubrication. Four bearing sleeves are installed in the pump body, and the end clearance is automatically adjusted with the working pressure, so the pump pressure is stable, the output flow pulsation is small, and the volume ratio is high.