Recommend a few magnetic centrifugal pump
1:CQB magnetic centrifugal pump suitable for petroleum, chemical, pharmaceutical, metallurgy, electroplating, environmental protection, food, film developing, water treatment, such as defence industries, is conveying inflammable, explosive, volatile liquid, poisonous, rare precious and various corrosive liquid ideal equipment.Suitable for conveying suction pressure is not greater than 0.2 MPa, the maximum working pressure of 1.6 MPa, temperature not over 100 ℃, density is not greater than 1600 kg/m3, viscosity is not greater than 30 x 10-6 m2 / S does not contain the liquid of hard particles and fibers.
2:CQB – F type fluorine plastic magnetic drive pump, magnetic coupling transmission, there is no point of dynamic seal, thus completely eliminate the general shaft type centrifugal pump shaft sealing run, run, drip, leak phenomenon.The over-current components using fluorine plastic industrial ceramics, has excellent resistance to corrosion and sealing, not aging, no toxin decomposition, etc.Transmission power below 3 kw or less DN50mm for full fluorine plastic magnetic drive pump.
3:Modern type self-priming magnetic drive pumps (hereinafter referred to as the self-priming pump), with static seal instead of dynamic seal for the pump, the pump flow components in a completely sealed state, completely solve the other pump mechanical seal inevitable run, run, drip, leak of ills, pump body and the material flow components all adopt the corrosion resistance of stainless steel, steel jade ceramic, four fluorine graphite materials, such as the function of both type CQ magnetic drive pump, self-priming and set at a suit, without bottom valve and water, self-priming height of 4 meters.
4:CQ magnetic drive centrifugal pump (hereinafter referred to as magnetic pump) is the application of the working principle of magnetic couplings in centrifugal pump of the new product, reasonable design, advanced technology, with fully sealed, without leakage, corrosion resistance, the characteristics of its performance reach the advanced level of similar foreign products.With static seal instead of dynamic seal, magnetic pump flow components of pump in a completely sealed state, completely solve the other pump mechanical seal of the inevitable run, run, drop.Magnetic pump with corrosion resistant, high strength engineering plastic, corundum ceramic, as a manufacturing material such as stainless steel, so it has good corrosion resistance, and can make the medium to be delivered from pollution.
5:ZBF product complies with JB/T 7742-1995 – standard for small magnetic transmission centrifugal pump and is an optimum product for the integrated design of magnetic pump all over the country.Combined with foreign advanced technology, using the outer recirculation self-priming plastic magnetic pump structure.This pump is mainly made of reinforced pp material, with short time of self-priming and long life, is the automation long distance control and fluid transmission of strongly corrosive liquid pump without leakage.
6:Magnetic pipeline pump is the company in more than 10 years experience in design and manufacture of horizontal magnetic pump based on the development of a new type of pipeline pump, it has the characteristics of type ISG pipeline centrifugal pump, and has the advantages of magnetic chemical pump is the latest generation of leak-off pipe centrifugal pump
7:CQF engineering plastic magnetic drive pump (hereinafter referred to as magnetic pump), is to apply modern magnetics principles, the working principle of magnetic couplings for centrifugal pump of new products, with static seal instead of dynamic seal, magnetic pump flow components of pump in a completely sealed state, completely solve the other pump mechanical seal of the inevitable run, run, drop the ills.Magnetic pump selection of corrosion resistance, high strength engineering plastic, steel jade ceramic and stainless steel as manufacturing material, so it has good corrosion resistance, and can make the medium to be delivered from pollution.
8:CQB – GB stainless steel heat insulation (hereinafter referred to as magnetic pump) magnetic pump, insulation type magnetic drive pump (20 ℃ ~ 150 ℃) heat preservation is to rely on a permanent magnet steel interaction transmission, with static seal instead of dynamic seal is a new type pump.The pump compact structure, beautiful appearance, small size, low noise, reliable operation, convenient use and maintenance.If the fluid temperature greater than 150 ℃,Recommended choice high temperature oil pump. It can transfer up to 380 degrees of liquid.
9:CQB – G magnetic pump applied to petroleum, chemical, pharmaceutical, metallurgy, electroplating, environmental protection, food, film developing, water treatment, defense and other industries, is high temperature conveying inflammable, explosive, volatile liquid, poisonous, rare precious and ideal equipment of various kinds of corrosive liquid.Suitable for conveying system working pressure is less than 1.6 mpa, temperature not over 280 ℃, the density is not greater than 1840 kg/m3, the viscosity is not greater than 30 cm2 / S does not contain the liquid of hard particles and fibers.