Introduction of oil transfer pump
Here’s a look at the important Chinese pumps, which are mainly used to transfer oil.
1,YCB gear oil pump
YCB oil transfer pump scope of application: suitable for conveying containing no solid particles and fibers, non-corrosive, temperature is not higher than 150 ℃, the viscosity of 5 to 1500 CST lubricating oil or other liquid properties similar to lubricating oil.
2,2cy oil transfer pump
2cy oil transfer pump suitable for: 2cy oil transfer pump is suitable for conveying containing no solid particles and fibers, non-corrosive, temperature is not higher than 200 ℃, the viscosity of 5 to 1500 CST nature of lubricating oil or other liquids, such as lubricating oil, and is suitable for the hydraulic drive system.
3,KCG oil transfer pump
KCG oil transfer pump USES: plastic rubber processing industry, textile printing and dyeing industry, coating industry, wood processing industry, food industry, paper making, printing and other liquid transfer heat carrier heating and other industries.
4,2CG oil transfer pump
2 CG oil transfer pump use for residual oil, coal tar, fall to the ground, foam raw materials and additives such as transfer medium, pressure, is glass, foam, building materials, chemical construction, petroleum, grain and oil industry ideal conveying pressure equipment.
5,RCB oil transfer pump
RCB oil transfer pump USES: used for conveying heavy oil, bitumen, rubber, resin, detergent, etc.RCB oil transfer pump scope of application: applicable to transport non-corrosive, not containing solid particles, with coagulability medium at room temperature.Especially suitable for cold area outdoor media need to heat preservation in the process of installation and process, medium temperature can reach 250 ℃, the viscosity of 5 to 1500 CST.
6,KCB gear oil transfer pump
KCB oil transfer pump suitable for: the oil transfer pump is suitable for conveying containing no solid particles and fibers, non-corrosive, temperature is not higher than 80 ℃, the viscosity of 5 to 1500 CST lubricating oil or other liquid properties similar to lubricating oil.
7,LB and fuel pumps
LB oil transfer pump, scope of application: the oil transfer pump delivery not containing solid particles and fibers, non-corrosive, temperature is not higher than 80 ℃, the viscosity is 5 ~ 1500 st
The lubricating oil or other liquid properties similar to lubricating oil.
8,Gasoline Transfer Pump
Mainly used for oil, oil depot, loading and unloading, this series of pumps is characterized by high flow rate, high efficiency and explosion-proof.Flow:3-800M3/h